Search The Support Knowledgebase


(database of technical support questions and answers):
   
« previous next »
Pages: [1]

Author Topic: Button Up Display problem

This topic contains a post which is marked as Best Answer. Press here if you would like to see it.

Offline Nimzovich

  • Gold PREMIUM Subscription
  • Advance Member
  • *
  • *
  • Posts: 33
Button Up Display problem
« on: November 16, 2014, 01:08:02 AM »
The software allows me to select a button up and button down for the display on my Fanatec wheel, but when I then try to change the button control assignment, it won't accept any changes. The previously assigned button then stops working.
Logged
  • My SLI Devices List:
    SLI-PRO

Offline zappadoc

  • Management
  • Suppreme Master Sensei
  • *
  • *
  • *
  • Posts: 5760
  • No email or PM support
    • ZDoc Dev Blog
Re: Button Up Display problem
« Reply #1 on: November 16, 2014, 08:14:13 AM »
The bug is confirmed this is due to the unstable value of the CSP Brake, its value change continuously and fill the control event which prevent to assign anything else...I will post a fix asap, thanks for your input. In the meantime unplug the CSP to assign a control.
Logged
No support will be provided by PM or EMAIL, PM has been disabled due to heavy spam and abuse, please post in the support boards, thanks for your understanding.

Offline zappadoc

  • Management
  • Suppreme Master Sensei
  • *
  • *
  • *
  • Posts: 5760
  • No email or PM support
    • ZDoc Dev Blog
Re: Button Up Display problem
« Reply #2 on: November 16, 2014, 09:32:43 AM »
Sorry for this inconvenience. I pushed the update.

run the manager and select menu "Check For Update..."
and then click the "Download And Install All" button
to get the update

the full installer v3.4.2.5c will be available on website today, as well.

Logged
No support will be provided by PM or EMAIL, PM has been disabled due to heavy spam and abuse, please post in the support boards, thanks for your understanding.
Marked as best answer by zappadoc on August 28, 2016, 10:25:24 AM

Offline zappadoc

  • Management
  • Suppreme Master Sensei
  • *
  • *
  • *
  • Posts: 5760
  • No email or PM support
    • ZDoc Dev Blog
Re: Button Up Display problem
« Reply #3 on: November 19, 2014, 02:33:04 PM »
Following the assignment issue I have pushed another update today (build v3.4.2.6) which is a recommended update for all CSP owners.
The definitive fix is to upgrade to v3.4.2.6 (Check For Update...) and set the new deadzone parameter of brake pedal in Clubsport Pedals setup to 5% (the brake pedal is usually on axis 6).



Logged
No support will be provided by PM or EMAIL, PM has been disabled due to heavy spam and abuse, please post in the support boards, thanks for your understanding.
Pages: [1]
« previous next »