Search The Support Knowledgebase


(database of technical support questions and answers):
   
« previous next »
Pages: [1]

Author Topic: Clutch Biting Point and rf2

This topic contains a post which is marked as Best Answer. Press here if you would like to see it.

Offline Zizza17

  • Gold PREMIUM Subscription
  • Advance Member
  • *
  • *
  • Posts: 20
Clutch Biting Point and rf2
« on: December 08, 2015, 05:05:53 PM »
Hi all
I was trying to set the clutch biting point but I can not get it working in RF2

I set
True display_clutch_rpm_state
True display_clutch_biting_point_state
SW_CLUTCH_RPM S7 Ferrari F1 Wheel Integral (the clutch pedal, the same set in RF2)
BTN_CLUTCH_BITING_POINT_FINDER B8 (a button on the steering wheel)

In the game I set manual clutch, I'm in a quiet location circuit, put it in neutral, clutch pedal depressed, button "B8" hold, put the first gear, I give some throttle and gradually release the clutch and the car moves but I can not get no value.
Logged
  • My SLI Devices List:
    SLI-M, SIMRACE-DLX, T500RS, F1add-on mod, Custom GT Wheel
My Device:
Sli-M, Thrustmaster T500rs GT mod... F1 wip

Offline zappadoc

  • Management
  • Suppreme Master Sensei
  • *
  • *
  • *
  • Posts: 5760
  • No email or PM support
    • ZDoc Dev Blog
Re: Clutch Biting Point and rf2
« Reply #1 on: December 08, 2015, 10:22:50 PM »
Hello, clutch BP works only with a special firmware from SIM DISPLAY.  your device is certainly not supported.
Logged
No support will be provided by PM or EMAIL, PM has been disabled due to heavy spam and abuse, please post in the support boards, thanks for your understanding.

Offline Zizza17

  • Gold PREMIUM Subscription
  • Advance Member
  • *
  • *
  • Posts: 20
Re: Clutch Biting Point and rf2
« Reply #2 on: December 09, 2015, 06:23:22 AM »
Thanks!
So, this special firmware is only for the "Deluxe" or is also needed for the SIMR-F1/SLI-F1?
« Last Edit: December 09, 2015, 06:32:36 AM by Zizza17 »
Logged
  • My SLI Devices List:
    SLI-M, SIMRACE-DLX, T500RS, F1add-on mod, Custom GT Wheel
My Device:
Sli-M, Thrustmaster T500rs GT mod... F1 wip

Offline zappadoc

  • Management
  • Suppreme Master Sensei
  • *
  • *
  • *
  • Posts: 5760
  • No email or PM support
    • ZDoc Dev Blog
Re: Clutch Biting Point and rf2
« Reply #3 on: December 09, 2015, 06:37:39 AM »
Hello, I don't know, sorry. Please ask Nace from SIM Display for hardware support, thanks
Logged
No support will be provided by PM or EMAIL, PM has been disabled due to heavy spam and abuse, please post in the support boards, thanks for your understanding.
Marked as best answer by zappadoc on August 28, 2016, 10:17:30 AM

Offline zappadoc

  • Management
  • Suppreme Master Sensei
  • *
  • *
  • *
  • Posts: 5760
  • No email or PM support
    • ZDoc Dev Blog
Re: Clutch Biting Point and rf2
« Reply #4 on: December 09, 2015, 06:48:03 AM »
you need the latest firmware and it should work with DLX, F1 and GT display from SIM Display...

SLI-F1 is a Bodnar display and DO NOT SUPPORT biting point.

Regards
Logged
No support will be provided by PM or EMAIL, PM has been disabled due to heavy spam and abuse, please post in the support boards, thanks for your understanding.
Pages: [1]
« previous next »