Hi, some guys asked me how to
map the Led of the buttonbox, so here is a quick guide with some screenshots.
First you have to know the type and index of the led, this is here in getting started section the sticky
VDASH-EMU ButtonBox (buttons, led and switches index list)The buttonbox included with VDASH-EMU have external leds index from 7 to 10 (9 is yellow and the others are red)
than if you read before the FAQ and video tutorials related you learned how to edit setup and assign function warning to a led using the
Advanced Options panel of SLIMax Mgr Pro
So, you just have to choose the function and click the corresponding index.
For example:- assign
Power ON function to led 9, I type "power" + ENTER key in search field and double-click the
LED_POWER function
- and assign it to led 9
- same thing for
Traction Control to led 8 and
ABS (Antilock_brakes) to led 10
- also, it could useful to be
warning about low fuel on led 7, type lowfuel in search field and double-click the
led_lowfuel function to assign the led 7
AND DO NOT FORGET TO CLICK THE
APPLY button to confirm your change and obviously at end to
SAVE your setup!!
that's it!
Cheers,
z
