MotionMax Manager (MMX) is a powerful software to manage your 2DOF, 2DOF+Traction Loss (3DOF), 4DOF, 4DOF+TL (5DOF) and 6DOF motion simulator based on Dyadic System SCN5 and SCN6 actuators. The traction loss management is included with all editions. The manager supports more than 60 games, see the list below.
PRO drivers love our motion system, the feeling is natural, the motion signal pure and clear and the feedback is complete and accurate. They do not need more than a lap to feel at home and have a perfect control!
The MotionMax Manager is available here through EKSIMRacing website or from authorized dealers. A minimum contribution to EKSIMRacing foundation is required to get your MMX license to give your support to the MotionMax project (please read the registration information).
Information
MotionMax Manager project has been started in 2015 and includes the full support of 6 DOF motion simulator platform (and its 2DOF+TL and 3DOF+TL declination), From PRO to casual with a full 1:1 level motion driving simulator to a simple cockpit or VR rig our 6DOF (or 2DOF+TL version) of MotionMax Manager is easy to use, accurate and powerful and supports a maximum of games and simulations.
MotionMax Manager is definitively a PRO car racing driving simulator software even if it can be use for flight-sim (starting with version 1.0.0.3 the software includes the support of 200 mm stroke and “Flight Mode” a new forward kinematics dedicated to flight simulation). The internal vehicle physics interpreter (V.P.I.) provides an ultra-realistic motion result in all car categories (Formula 1 and other open wheel categories/Endurance/Proto/GT/Rally/Kart/Jet/Helicopter/Airplane).
The 6DOF version contains an unique and exclusive “Yaw Dynamics” feature to accurately control the amount of the traction loss without the need of additional actuator. With the capability to generate up to 1000 positions per second, it is only limited by the specs of the actuators in terms of accelerations, speed and load.
Over the past decade, manufacturers of motion simulators have been focused on the FORCES and on force delivery. The forces involved in driving a car are important but NOT essential for PRO racing training. Almost all simulator of this kind today act like a pinball machine … and almost all PRO race car drivers ask to stop the motion simulator when they give this a try…
it’s perfectly normal to feel uncomfortable with this kind of software/machine, all the movements are over-reactive and exaggerated, they feel the forces but not the car and the road surface. This is not the case with MotionMax Manager.
The force factor must be balanced with ultra-realistic movements to give the internal auditory system enough information to properly sense the car’s chassis and the road surface. This balance is the key feature to the internal V.P.I. system of MotionMax Manager (Vehicle Physics Interpreter) and even if we also provide a 2DOF+TL and 3DOF+TL management software this is ONLY possible on a real 6DOF car racing motion platform, The Yaw Dynamic System completes the V.P.I to manage the traction control without additional DOF machinery (another unique feature of MotionMax Manager 6DOF). All other machines will NEVER give you a complete information from the car racing simulation. If you still want a more conventional simulator for your non PRO configuration and DIY projects you may consider the MotionMax 3DOF+TL and 2DOF+TL manager which includes dedicated management for traction loss and braking/acceleration (SURGE).
PRO drivers love our motion system, the feeling is natural, the motion signal pure and clear and the feedback is complete and accurate. They do not need more than a lap to feel at home and have a perfect control!
How To Get MotionMax 2DOF/3DOF/6DOF?
MotionMax 2 Manager SCN Edition (2DOF+TL+SURGE) is available from EKSIMRacing foundation (read the getting started information HERE), the MotionMax 6DOF is available for purchase to general public with a ready to use motion simulator platform from FREX Japan HERE. Also, the software is included with simulators manufactured by private motorsports companies, OEM hardware motion simulator companies and actuator manufacturers who are in partnership with us. MotionMax 5 (3DOF+TL+SURGE) is also available from EKSIMRacing but we are still looking for a new actuator with more load and speed, contact us for more info.
Simulation And Game Studios: Contact us for adding the support of your game/simulation to MotionMax Manager.
Electric Linear Actuators And Motion Platform Manufacturers: Contact us if you’re a manufacturer and want us to add the support of your electric linear actuator to MotionMax Manager. We’re always happy to add the support of new electric linear actuator to our motion software.
Authorized Dealers: We are looking for distributors of our MotionMax software to promote 2DOF, 3DOF, 4DOF, 5DOF and 6DOF motion simulator platform based on Dyadic SCN electric linear actuator or other brands. EKSIMRacing foundation is a nonprofit organization, our vocation is not to sell products directly but to promote sim-racing worldwide as we did during the past decade with racing display usb device and virtual racing dash display (Emulators). Contact us If you have a strong experience with motion platform and actuators and want to bundle your products with one of the best racing simulator management software. Make sure to send as much information as possible about your company, your position, your simulator project, your hardware,… to get a quick answer. To contact us use this form.
The MotionMax Manager is a powerful and easy to use software to manage simulator based on Dyadic System SCN5 and SCN6 actuators. The software manages multiple configurations:
2DOF (2 actuators on rear or front)
3DOF (2 actuators on rear or front + 1 actuator on side for traction loss )
4DOF Dedicated SURGE (one or two additional actuators dedicated to braking and acceleration)
All info to create your 2DOF+Traction Loss Racing Simulator Platform are available HERE
MotionMax 2DOF software is fully compatible with FREX SimConMotion simulator.
MotionMax 2DOF software is fully compatible with JCL V2 V3 V4 Series (including “Fury Dynamique” pack) of motion simulator based on SCN5 or SCN6. MotionMax 2DOF software is fully compatible with PROSIMU T1000 3M Series of motion simulator based on SCN5 or SCN6.
MotionMax 2DOF software is fully compatible with the SimXperience Stage 4 Motion Racing Simulator Kit
The MotionMax 2 is now available to manufacturers of simulators or/and actuators, contact us if you’re interested and want us to add the support of your motion platform to MotionMax.
The MotionMax 5 Manager (MMX5) SCN Edition is a powerful, extremely accurate and easy to use software to manage simulator based on Dyadic System SCN6 actuator. The software manages multiple configurations:
3DOF (4 actuators on each side)
4DOF (4 actuators on each side + 1 actuator on side for traction loss )
5DOF Dedicated SURGE (an additional actuators dedicated to surge)
The MotionMax 5 SCN Edition License is available through EKSIMRacing and authorized dealers. Contact us for more info.
We are looking for a new actuator with more load and speed than SCN6, contact us if you’re interested and want us to add the support of your motion platform.
MotionMax 6 Manager 6DOF includes the SCN Actuator driver which is optimized to get the best of SCN Actuator. Also, default profiles (DOF settings) are included for your convenience to get started quickly with your favorite simulation. With a full control of your 6DOF simulator machine, you can fine tune the motion result to suit your needs. Obviously, you can create, modify and share your custom profiles very easily.
The software manages the simulator with yaw, pitch, roll, sway, surge, heave capabilities. It is managed as a 6DOF Stewart motion platform optimized for car racing and flight-sim (with flight mode activated) . The 6DOF motion platform with MotionMax 6 is actually the best car racing simulation experience available today at this price range.
The MotionMax Manager SCN Edition License is available through EKSIMRacing and authorized dealers like FREX Japan HERE. Click the image below to get started with your 6DOF simulator.
Wireless control of your motion platform from your Android phone.
Motion Controls (Main Features) Recording Live Telemetry & Saving Data Play/Pause Live Telemetry Stop Sending Data To Machine Repeat (Loop) Recorded Telemetry Sequence Load & Run Previously Recorded Telemetry Set Data Rate from 62/pps to 1/pps (Positions Per Second) Visual Feedback Of Orientation & Acceleration
Almost All Plugins are usually included in the installer of SLIMax Manager Pro and MotionMax Manager. Check for update to get the latest version of plugins and keep your install up to date.
Here is the list of plugins available at this date (2021-07, check the plugins page for more info):
*Included with MotionMax Manager and available on demand (not free) for SLIMax Manager Pro **PRO custom plugins available to PRO subscribers only, contact us
