General Option: VoCore Screen Settings (Videos)
VDASH-EMU for Windows 2024 version 1-1.41 (and greater) add a full support of VoCore Screens 4″, 4.3″, 5″, 6.8″ and the new ROUND screen.
6.8″ screen touchscreen demo
The Vocore screen 6,8″ is the ideal size for a sim racing dash, VDASH-EMU for Windows with this confortable touchscreen size allows to quickly setup or modify or load a digital racing dash without quitting the current game session.
Open General Options and click the button VoCore Settings
VoCore Allowed
Activate/Deactivate VoCore screen management
Auto Minimize Window
Minimize window automatically
VoCore Target ID
“Default” is the recommended option if you you have only one VoCore screen. Select the target screen if you have more than one VoCore screen connected.
Flip Vertical
Rotate screen by 180°
TouchScreen Allowed
Activate/Deactivate Touch-Screen management (see troubleshooting notice below)
TouchScreen Calibration (X: n, Y: n)
Because we poll the raw touch point (x,y) of touchscreen we need sometime to calibrate X and Y.
X Calibration Slider: Adjust the touch response along the horizontal (X) axis (-60 to 60 pixels).
Y Calibration Slider: Adjust the touch response along the vertical (Y) axis (-60 to 60 pixels).
Example of calibration of our Vocore 5″ flipped vertically:
However, our Vocore screen 6.8″ does not seem to need calibration so X=0 and Y=0
Double Rendering
Activate the double rendering option ONLY if you have a misalignment of the image on your screen. Not recommended for new VoCore screen.
Brightness
Screen brightness can be adjusted with the slider from 5 to 100%
VoCore Windows USB Screen Driver
Your VoCore screen must recognized by Windows in the Devices Manager as USB2.0 Screen
Click this line to download and install the WinUSB driver if needed.
Troubleshooting Notice
If you are experiencing issues with your screen, please refer to the following troubleshooting steps.
In all cases, please ensure that the issue is not related to a loose or faulty USB connection/cable.
- Check the USB cable for any damage or issues.
- Unplug the USB cable from your PC.
- Wait for 5 seconds.
- Plug the USB cable back into your PC
If the issue persists after checking the USB connection, please proceed with the following troubleshooting steps:
1. Screen Recognition Issues or Weird Behaviors:
Screen is not properly recognized or exhibits unusual behavior.
Solution: Reinstall the screen driver (see the link above to download and install the driver again).
2. Touchscreen Issues
Screen does not work properly after touching the screen.
Solution: Deactivate touchscreen support in the settings (uncheck the “Touchscreen Allowed” option). This issue is likely related to a firmware problem.
If you continue to experience issues after trying these troubleshooting steps, please contact your hardware supplier for further assistance.